Submited in: 3D
| Total Views: 34642
Author: Mate Maksan
We are going to see in this tutorial how to create lettice in 3D Studio Max.
Create a Cylinder and decrease the Sides to 3, to get something like it is shown on the picture 1.
Choose that three sides and extrude them. Watch out! For Extrusion Type select By Polygon. See the picture below.
Connect the edge of every sides like it is shown on the picture below.
Now, move the points (Vertex) of the new edges like it is shown on the picture below.
Choose every polygons from every sides and delete them.
Choose Tools > Array. On the following picture, you can see the values that I have used. Your values, maybe will be a little different. It's important that you create array for x-coordinate. In my example, the Incremental is on X 2.7 and Count 40. See the picture below.
Select now the whole 40 (or whatever you put) parts of array and create one more array, but for this time, do that for y-coordinate.
Now, move that new made array on the left or right, to get a closed-end holes like it is shown on the picture below.
Choose now the booth arrays (all parts) and create another, new array. We again create on y-coordinate. For this time, the number of new count is 10.
Now, you have something like it is shown on the picture below. Attach now the entire parts and choose the all points (Vertex). Choose Weld and increase slightly until you see that the edge points are attaching in one point.