Toxiclab.org

Spring Flash Banner

3.3.2010, 17:59
Submited in: Flash | Total Views: 4084

Using this thoroughly explained, detailed flash lesson, I will explain to you how to create spring flash banner. You don't have to use action script code to make this lesson. This banner you can use for some presentation and animation. Using this lesson, you will also learn how to import any photo into a flash stage, how to aligned it with the background, how to convert it into a Movie Clip Symbol, how to animate it, apply flash filters on it and much much more.

Example:



Step 1

First, save two photos below that we will use for this lesson!







Step 2


Create a new flash document. Press Ctrl+J key on the keyboard (Document Properties) and set the width of your document to 400 pixels and the height to 250 pixels. Select any color as background color. Set your Flash movie's frame rate to 38 and click ok.

Step 3

Call the current layer spring 1. Double-click on its default name (Layer 1) to change it. Press Enter once you have typed in the new name!

Step 4

Choose File > Import > Import to Library and import two spring photos that you just saved in step 1.

Step 5

Select the Selection Tool (V) and using the drag and drop technique, move the first photo from the Library on the stage!

Step 6

While the photo is still selected, go to the Align Panel (Ctrl+K) and do the following:

1. Make sure that the Align/Distribute to Stage button is turned on,
2. Click on the Align horizontal center button and
3. Click the Align vertical center button.



Step 7

While the photo is still selected, hit F8 key (Convert to Symbol) to convert it into a Movie Clip Symbol.



Step 8

Click on frame 15,65 and 80 and hit F6 key.

Step 9

While you're still on frame 80, select the Selection Tool (V) and click once on the photo to select it. Then, go to the Properties Panel (Ctrl+F3) below the stage. After that, select Filters tab from the left side. Click on the plus icon and select the Blur filter. Make the adjustments as follows:



Do this also for frame 1

Step 10

Right-click anywhere on the gray area between frame 1 and 15 and frame 65 and 80 on the timeline and choose Create Motion Tween from the menu that appears.

Step 11

Create a new layer above the layer spring 1 and name it spring 2.

Step 12

Click on frame 75 of layer spring 2 and hit F6 key.

Step 13

While you're still on frame 75, move the second spring photo from the flash library on the flash stage.

Step 14

While the photo is still selected, repeat steps 6 and 7.

Step 15

Click on frame 90, 140 and 155.

Step 16

While you're still on frame 155, repeat step 8. Do this also for frame 75.

Step 17

While you're still on frame 75, select the Selection Tool (V) and click once on the photo to select it. Then, go to the Properties Panel (Ctrl+F3) below the stage. On the right, you will see the Color menu. Select Alpha in it and put it down to 0%. Repeat this step also for frame 155,80 and 1

We're done!

Test your animation and enjoy!

Download example

Are you a website owner?
Click here to register and submit your tutorials!

Browse by category


Most popular tutorials